So sánh sản phẩm
Godox Power Control Flash Trigger 2.4G XT-16

Godox Power Control Flash Trigger 2.4G XT-16

Hãy trở thành người đầu tiên đánh giá sản phẩm này( 0)
  • So sánh
  • Lượt xem: 3066
  • Ngày đăng: 10/07/2017

Tốc độ ăn đèn: 1/250s

Phát sóng xa 100m

Sử dụng pin AA

Dùng cho đèn studio hỗ trợ USB interface như: Godox AD180, AD360, DE400, QS Series

  • Giá sản phẩm
  • 790.000 đ
Mua ngayThêm vào giỏ hàng

Godox Trigger XT-16

Godox have released 2.4GHz versions of their previous (433MHz) FT-16 radio trigger set, in the new XT16 transmitter, and clip on XTR16, and XTR16s receivers.

The remote manual XT16 transmitters and receivers are basically the same on the outside as the previous FT-16 units, only the internals have been updated to Godox’s new 2.4GHz X radio system.

Most significantly though, the new XTR16 and XTR16s receivers now bridge the gap between the popular remote manual flash units like the AD360 bare bulb flashes, and V850 speedlites, and Godox’s latest X series TTL trigger system (and radio enabled master flash units).

 

 

 

Godox XT16

 

X series transmitter units like the X1-C and X1-N will now fire and control remote manual power levels of AD360 and V850 flash units (with corresponding XTR16 and XTR16s clipped to the side of the flashes).

Radio enabled master flash units like the Godox TT685C / TT685N should also provide similar control when used as the transmitter unit on camera.

 

 

Godox XT16

 

Godox have provided samples of the XTR16 and XTR16s receivers, and via the X1-C transmitter I am able to control the remote manual power levels of AD360 and V850 strobes, while also using the new AD600B in TTL mode (or remote manual mode) at the same time.

And all providing HSS if desired. (HSS mode must be switched on manually on the AD360 and V850 etc).

All 5 groups (A / B / C / D / E) of the X1-C and X1-N transmitter units work, and correspond with the groups set on the XTR16 and XTR16s receiver group dials.

Groups can also be turned on and off individually from the X1-C transmitter.

(Please note though – mixing TTL and Remote Manual groups, and turning groups on and off individually, requires 2012 onward camera bodies when using the X1-C transmitter for Canon).

 

 

 

Godox XT16

 

The XTR16 receivers are also compatible with Godox’s large range of AC mains powered studio lights like the QT600, GT, GS, DE, etc.

Though with the AC powered studio lights remote manual power control is not likely to be possible through the X1-C and X1-N transmitter units (due to the different power scale used). A separate XT16 transmitter could be used as a hand held remote for power control though.

 

Hướng dẫn mua hàng tại Ngọc Camera

Ðịa Chỉ : 112 Trần Hưng Đạo, Phường Phạm Ngũ Lão, Quận 1, Thành Phố Hồ Chí Minh
Ðiện Thoại : 028 66 581 581
Hotlines : 0911 581 581 - 0917 581 581

Tốc độ ăn đèn: 1/250s

Phát sóng xa 100m

Sử dụng pin AA

Dùng cho đèn studio hỗ trợ USB interface như: Godox AD180, AD360, DE400, QS Series

Sản phẩm cùng danh mục

Chat Facebook